TECHNICAL SUPPORT

1. Before installation

2. Remove the trim under the gear with a prying plate and take out the screws

3. Take out the baffle on the right side of the gear with a prying plate

4. Take out the baffle on the left side of the gear with a prying plate

5. Take out the gear lever first, and then take out the decorative panel by prying the plate

6. Take out the right fixing screw with a screwdriver

7. Take out the left fixing screw with a screwdriver

8. Take out the display frame with a prying board

9. Take out the fixing screws of the trim panel

10. Take out the air conditioner air outlet trim panel with a pry plate

11. Take out the left display trim panel with the prying plate

12. Remove the CD host fixing screws and remove the CD host

13. Connect the Android power cord to the original vehicle

14. Transfer line of original double flash switch (detailed operation steps for scanning QR code)

15. Take out the CD host of the original vehicle and install the additional air conditioning panel back to its original position

16. Cut off the locating posts of the trim frames on both sides of the centre console with diagonal pliers

17. Insert the navigation harness correspondingly

18. Successful Installation