2. Remove the trim under the gear with a prying plate and take out the screws
3. Take out the baffle on the right side of the gear with a prying plate
4. Take out the baffle on the left side of the gear with a prying plate
5. Take out the gear lever first, and then take out the decorative panel by prying the plate
6. Take out the right fixing screw with a screwdriver
7. Take out the left fixing screw with a screwdriver
8. Take out the display frame with a prying board
9. Take out the fixing screws of the trim panel
10. Take out the air conditioner air outlet trim panel with a pry plate
11. Take out the left display trim panel with the prying plate
12. Remove the CD host fixing screws and remove the CD host
13. Connect the Android power cord to the original vehicle
14. Transfer line of original double flash switch (detailed operation steps for scanning QR code)
15. Take out the CD host of the original vehicle and install the additional air conditioning panel back to its original position
16. Cut off the locating posts of the trim frames on both sides of the centre console with diagonal pliers
17. Insert the navigation harness correspondingly
18. Successful Installation